Leather Deglazer
The Leather Deglazer prepares leather before painting by removing the factory finish, residues, and grease for optimal paint adhesion.
For synthetic leather or delicate surfaces, lightly sand the surface instead.
Customize
Restore
Crash Test
Use the leather preparer before each customization to remove the dusts and the manufacturer's factory varnish. This will give you the best paint adhesion to the leather.
Tips for use
- Apply the stripper to a cotton pad
- Rub the area to be painted well
- Make sure the area is completely dry
Tip: to make sure you don't paint on a fresh solvent, especially if you're using acetone, always swipe with a damp cloth after degreasing the leather.
FAQ
To prepare leather before painting, use a suitable Leather Deglazer :
- Acetone is a powerful solvent that can dry out and damage leather, and may even melt certain synthetic materials. Use it with caution, especially on high-quality leather.
- Leather Deglazer is specifically designed to remove the factory finish while being gentler on the material. It helps prepare the leather properly before painting.
